Altium

Design Rule Verification Report

Date : 10/19/2015
Time : 1:33:30 PM
Elapsed Time : 00:00:05
Filename : D:\Projects\TIDA-00563\TIDA-00563_E1\TIDA-00563_E1.PcbDoc
Warnings : 0
Rule Violations : 0

Summary

Warnings Count
Total 0

Rule Violations Count
Differential Pairs Uncoupled Length using the Gap Constraints (Min=8mil) (Max=8mil) (Prefered=8mil) and Width Constraints (Min=15mil) (Max=15mil) (Prefered=15mil) (InDifferentialPair ('MSP_DP_DM_DIFF')) 0
Matched Net Lengths(Tolerance=200mil) (InDifferentialPair ('MSP_DP_DM_DIFF')) 0
Differential Pairs Uncoupled Length using the Gap Constraints (Min=8mil) (Max=8mil) (Prefered=8mil) and Width Constraints (Min=15mil) (Max=15mil) (Prefered=15mil) (InDifferentialPair ('MSP_DP_DM_DIFF')) 0
Matched Net Lengths(Tolerance=200mil) (InDifferentialPair ('MSP_DP_DM_DIFF')) 0
Clearance Constraint (Gap=7.874mil) (IsVia),(InAnyComponent) 0
Width Constraint (Min=10mil) (Max=20mil) (Preferred=15mil) (InNetClass('PWR')) 0
Net Antennae (Tolerance=0mil) (All) 0
Minimum Solder Mask Sliver (Gap=2.5mil) (All),(All) 0
Minimum Solder Mask Sliver (Gap=0.7mil) (InComponentClass('Logo')),(InComponentClass('Logo')) 0
Hole To Hole Clearance (Gap=10mil) (All),(All) 0
Differential Pairs Uncoupled Length using the Gap Constraints (Min=8mil) (Max=8mil) (Prefered=8mil) and Width Constraints (Min=15mil) (Max=15mil) (Prefered=15mil) (All) 0
Pads and Vias to follow the Drill pairs settings 0
Hole Size Constraint (Min=7.874mil) (Max=251mil) (All) 0
Acute Angle Constraint [Tracks Only] (Minimum=45.000) (All) 0
Minimum Annular Ring (Minimum=6mil) (All) 0
Minimum Annular Ring (Minimum=5.905mil) (IsVia and InAnyComponent) 0
Un-Routed Net Constraint ( (All) ) 0
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Routing Via (MinHoleWidth=10mil) (MaxHoleWidth=16mil) (PreferredHoleWidth=12mil) (MinWidth=20mil) (MaxWidth=32mil) (PreferedWidth=24mil) (All) 0
Routing Via (MinHoleWidth=7.874mil) (MaxHoleWidth=16mil) (PreferredHoleWidth=12mil) (MinWidth=19.685mil) (MaxWidth=32mil) (PreferedWidth=24mil) (IsVia and InAnyComponent) 0
Routing Layers(All) 0
Power Plane Connect Rule(Direct Connect )(Expansion=10mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All) 0
Width Constraint (Min=8mil) (Max=100mil) (Preferred=10mil) (All) 0
Clearance Constraint (Gap=7.865mil) (All),(All) 0
Clearance Constraint (Gap=15mil) (InPolygon),(All) 0
Clearance Constraint (Gap=15mil) (OnCopper and InPoly),(IsKeepOut) 0
Clearance Constraint (Gap=40mil) (OnCopper and InComponentClass('Mounting Holes')),(IsKeepOut) 0
Total 0